Cousin Chained In Choker & Earrings

Back to category
by Krafty Max, Cousin

Cousin Chained In Choker & Earrings

Easy to make!

Project Details

  • Level:beginner
  • Time:10 minutes

Project Instructions

  • 1
    Note: two pair of needle nose pliers are needed to complete this project.
    Tip: the length of the Choker can be lengthened by using more chain for the Choker and making the Earrings shorter and/or adding more jump rings to step 4 of the Choker instructions.
  • 2
    Choker:
  • 3
    Separate off a 13-1/2 inch length of double link chain. Separate one link off one end and connect it to the other end of the chain so there is a single link on each end.
  • 4
    Connect nine jump rings together to form a jump ring chain. Attach one end of the jump ring chain to a single link on one end of the double link chain.
  • 5
    Use a 6 mm jump ring to attach a lobster claw clasp to single link on the other end of the double link chain.
  • 6
    Earrings:
  • 7
    Cut the loop off one end of an eye pin and form the wire into a shepherd’s hook ear wire.
  • 8
    Separate a 4 inch length of double link chain. Remove a link on one end of the chain. Use a 6 mm jump ring to connect the single link to the loop at the bottom of the shepherd’s hook ear wire.
  • 9
    Repeat steps 7 and 8 for a matching earring.

Project Details

  • Level:beginner
  • Time:10 minutes

Project Supplies

  • Cousin Jewelry Basics Chain Double Oval 18 inch Antique Gold 104525119
  • Cousin Jewelry Basics Jump Rings 4 mm and 6 mm Antique Gold 400 pc. 104563114
  • Cousin Jewelry Basics 7 mm x 9 mm Lobster Claw Clasp Antique Gold 24 pc. 104563276
  • Cousin Jewelry Basics Head Pins/Ball Pins/Eye Pins Antique Gold 135 pc. 104563096
  • Cousin Tool Basics Value Pack 3 pc. 104257385 (2)