Cousin Swarovski Chevrelier Earring SetBack to category
Cousin Swarovski Chevrelier Earring Set
Perfect for any special occasion, you can easily create this elegant, show-stopping chevron chandelier earring set with Swarovski crystals.
Want to get some tips on making jewelry? Watch the videos on A.C. Moore's YouTube channel.
Create your own, snap a picture, and share using #ACMooreInspired.
- Time:30 minutes
1Cut two 1" lengths of chain. Cut one more length of chain that is one link longer than 1".
2Use a 4 mm jump ring to connect one end of each length of chain to the bottom loop of an ear wire in this order: one inch length, one link longer length, one inch length.
3Slide a 4 mm Clear Crystal bicone, a 4 mm Light Pink crystal bicone, and a 4 mm Dark Pink crystal bicone onto an eye pin, thread the eye pin down through a hole in a 3-hole Silver slide chevron, slide on a 6 mm Light Pink crystal bicone, thread the eye pin down through the matching hole in another 3-hole Silver slide chevron, and form a loop. Repeat this step two more times for the other holes in the two 3-hole Silver slide chevrons.
4Connect the bottom of the three lengths of chain from step 2, in order, to the loops on the beaded sides of the eye pins from the previous step.
5Use 4 mm jump rings to attach a Dark Pink crystal briolette to the two end eye pin loops on the bottom 3-hole slide chevron.
6Slide a 4 mm Clear Crystal bicone, a 4 mm Light Pink crystal bicone, a 4 mm Dark Pink crystal bicone, and a 6 mm Light Pink crystal bicone onto a head pin and form a loop to make a bead drop. Connect the loop of the bead drop to the middle eye pin loop on the bottom 3-hole slide chevron.
7Repeat steps 1-6 for the matching earring.