Nicole's™ Bead Shop DIY Bride Bracelet, Earrings and Necklace

Back to category
by Nicole's™ Bead Shop Design Team

Nicole's™ Bead Shop DIY Bride Bracelet, Earrings and Necklace

Make this glamorous set for yourself or for a bride-to-be!

Project Details

  • Level:intermediate
  • Time:1 hour

Project Instructions

  • 1
    Necklace: cut two 17-1/2 inch lengths of chain.
  • 2
    Holding both of the chains together, use a 4 mm jump ring and attach both pieces of chain to the toggle bar of the toggle clasp on each end of the chains.
  • 3
    Cut a 9-1/2 inch length, an 11 inch length, and a 12 inch length of Gold beading wire.
  • 4
    Loop the 12 inch length of Gold beading wire through the round part of the toggle and crimp. String on one Gold round metal bead with crystals, 7 White pearls, one Gold round metal bead with crystals, 6 White pearls, one Gold round metal bead with crystals, 7 White pearls, one crimp tube. Loop the other end of the wire thru another round part of the toggle and pull wire thru until the swag is at the level you like, crimp.
  • 5
    Loop the 11 inch length thru the same round part of the toggle as first strand and crimp. String one Gold round metal bead with crystals, 5 White pearls, one Gold round metal bead with crystals, 6 White pearls, one Gold round metal bead with crystals, 5 White pearls. Loop through crimp on the other end of the toggle, pull the beading wire thru until the swag is at the level you like. Crimp.
  • 6
    Loop the 9-1/2 inch length of Gold beading wire next to the other two strands and crimp. String on one Gold round metal bead with crystals, 5 White pearls, one Gold round metal bead with crystals, 5 White pearls, one Gold round metal bead with crystals, 4 White pearls, one crimp tube. Loop the wire thru the toggle and pull the beading wire thru until the swag is at the level you like. Crimp.
  • 7
    Earring (make 2): attach an earring wire to a 6 mm closed jump ring.
  • 8
    Take 4 Gold ball head pins and cut them in the following lengths: 2 at 1 inch, 2 at 1-1/8 inch, 4 at 3/4 inch.
  • 9
    Using the 1-1/8 inch Gold ball head pin, thread on one White pearl. Make a loop at the very top of it and attach to the closed 6 mm jump ring
  • 10
    Using the 1 inch Gold ball head pin, thread on one White pearl. Make a loop at the very top of it and attach to the closed 6 mm jump ring.
  • 11
    Using the 3/4 inch Gold ball head pin, thread on one White pearl. Make a loop at the very top of it and attach to the closed 6 mm jump ring.
  • 12
    Using the second 3/4 inch Gold ball head pin, thread on one Gold metal bead with White crystals. Make a loop at the very top of it and attach to the closed 6 mm jump ring.
  • 13
    Bracelet:Cut three 12 inch lengths of elastic stretch cord.
  • 14
    Use a bead stopper at one end of your elastic cord, then thread on 3 White pearls & one Gold bar with White crystals, repeat this pattern 7 times.
  • 15
    Repeat step 14 but this time threading the Clear cord thru the center hole of the Gold bar with White crystals.
  • 16
    Repeat step 14 threading the Clear cord thru the last hole of the Gold bar with White crystals.
  • 17
    Tie a triple knot in all three of the Clear cords. Coat with Clear nail polish to make knot more secure.

Project Details

  • Level:intermediate
  • Time:1 hour

Project Supplies

  • Nicole's™ Bead Shop Round Glass Pearls 8 mm White 66 pc. 104800967 (2)
  • Cousin Jewelry Basics Toggle Closure Pack Gold 104563387 (8)
  • Cousin Jewelry Basics Small Twisted Chain Gold 34 inch 104525031
  • Cousin Jewelry Basics Round Metal Beads with White Crystals 5 pc. 104563307 (3)
  • Cousin Jewelry Basics Starter Pack Gold 145 pc. 104563633
  • Cousin Jewelry Basics Metal Spacer Bar Gold with White Crystals 6 pc. 104563567
  • Cousin Jewelry Basics Head Pins Gold 135 pc. 104563106
  • Cousin Tool Basics Value Pack 3 pc. 104257385
  • Panacea Heavy Duty 8 inch Wire Cutters 104455865
  • Crimping Pliers
  • Clear Elastic Stretch Cord
  • 0.45 mm Gold Bead Wire (1 package)
  • Clear Nail Polish