Nicole's™ Bead Shop Unchained Turquoise Jewelry Set

Back to category
by Nicole's™ Bead Shop Design Team

Nicole's™ Bead Shop Unchained Turquoise Jewelry Set

This turquoise set is truly gorgeous!

Project Details

  • Level:intermediate
  • Time:2 hours

Project Instructions

  • 1
    Necklace: Using flat nose & round nose pliers, separate 3 sections of the medium flat chain in following lengths: (2) – 3-1/2 inch and (1) – 8 inch.
  • 2
    Using the cutting pliers, cut 5 inch of small curb chain.
  • 3
    Using round nose pliers, create two beaded links with 8 mm Silver round beads.
  • 4
    Attach 3-1/2 inch section of small curb chain to top of Turquoise charm using 6 mm jump ring.
  • 5
    Using beaded link, attach another Turquoise charm.
  • 6
    Repeat steps 4-5 for second 3-1/2 inch section of medium flat chain.
  • 7
    Using 6 mm jump rings, attach two sections of necklace using 8 inch section of medium flat chain.
  • 8
    Add 5 inch small curb chain using 6 mm jump rings at same connection on the charms you just connected the long section of flat chain to.
  • 9
    Using 6 mm jump ring, attach Silver filigree charm to small curb chain.
  • 10
    Attach lobster claw clasp to one side of necklace using 6 mm jump ring.
  • 11
    Connect (5) 8 mm jump rings to create chain. Attach to other side of necklace to allow for flexible length.
  • 12
    Earring (make 2): using pliers, turn the loop of an earring wire sideways.
  • 13
    Attach a Silver filigree charm to earring wire, close loop of earring wire.
  • 14
    Cut following links of small cable chain 2 inch (2), 1-1/2 inch (4), 1 inch (4), 1/2 inch (4).
  • 15
    Attach chain to bottom of charm using 4 mm jump rings in following order: 1/2 inch, 1 inch, 1-1/2 inch, 2 inch, 1-1/2 inch, 1 inch, 1/2 inch.
  • 16
    Bracelet: Cut 2 lengths of beading wire, each 9-1/2 inch long.
  • 17
    Using a crimp tube and crimping pliers, crimp one end of each of the beading wire to create a loop.
  • 18
    String 1 White crystal round, one silver round on each beading wire.
  • 19
    Alternate (1) lampwork round and (1) 2-holed metal spacer using 5 lampwork beads on each beading wire.
  • 20
    Finish by stringing 1 Silver round and 1 White crystal round on each beading wire.
  • 21
    Crimp the end of each beading wire to secure beads.
  • 22
    Connect the two beaded strands at each ending using a 6 mm jump ring.
  • 23
    Attach toggle and clasp to ends using 6 mm jump ring.

Project Details

  • Level:intermediate
  • Time:2 hours

Project Supplies

  • Nicole's™ Bead Shop Antique Charms Teal/Turquoise Round Crackle Connector 6 pc. 104801141
  • Nicole's™ Bead Shop Lampwork Glass Beads/Crystals Marble Swirl Blue with Spacer 42 pc. 104800623
  • Cousin Jewelry Basics Metal Filigree Charms Silver/Turquoise 3 pc. 104744307
  • Cousin Jewelry Basics Metal Hammered Spacer Silver 4 pc. 104789765
  • Cousin Jewelry Basics Small Link Chain Silver 100 inch 104622014
  • Cousin Jewelry Basics Chain Medium Flat 22 inch Silver 104525138
  • Cousin Jewelry Basics Starter Pack Bright Silver 59 pc. 104563639
  • Cousin Jewelry Basics Jump Rings 4 and 6 and 8 mm Open Silver 120 pc. 104563124
  • Cousin Tool Basics Value Pack 3 pc. 104257385
  • Nicole™ Crafts Mini Flat Nose Pliers 104584503
  • Silver Beading Wire (1 package)
  • Crimping Pliers
  • Diagonal Cutting Pliers