Nicole's™ Bead Shop Walk on Wild Side Necklace & Bracelet

Back to category
by Nicole's™ Bead Shop Design Team

Nicole's™ Bead Shop Walk on Wild Side Necklace & Bracelet

Attractive & easy to make!

Project Details

  • Level:beginner
  • Time:30 minutes

Project Instructions

  • 1
    Bracelet:
  • 2
    Connect one lobster claw clasp to one 6 mm split ring. Cut one 5 inch length of bead wire. Connect one end of the bead wire to the 6 mm split ring using one crimp bead. String on the following beads: one 12 mm Black bead, three 16 mm Black & White beads and one 12 mm Black bead. Use one crimp bead to connect this end of beading wire to one 6 mm split ring.
  • 3
    Cut one 4 inch length of Black chain. Connect the end link on each end of the Black chain to the 6 mm split rings on each side of the bead strand from step #2.
  • 4
    Cut three more 4 inch lengths of Black chain. Open the end links on the three lengths of Black chain and connect to the end links on each end of the length of chain connected to the jump rings from step #3.
  • 5
    Open the loop on one eye pin, slide on one Clear e-bead and close the loop. Slide one Black & White bead onto the stem of the eye pin and form a loop to make a bead drop.
  • 6
    Slide three 12 mm Black beads onto each of three head pins and form loops to make three bead drops.
  • 7
    Open the loops in the bead drops from steps #5 and 6 and connect one 6 mm split ring onto each loop.
  • 8
    Cut one link of Black chain. Open the link and slide the single link between the split ring and the closed crimp bead from the end of step #2. Slide on the 6 mm split rings from the bead drops from step #7 and close the chain link to complete the bracelet.
  • 9
    Necklace:
  • 10
    Cut one 6 inch length of bead wire. String on: one Silver disc spacer bead, one Black & White bead, one Silver disc spacer bead, etc. until you have a total of five Silver spacer beads and four Black and White beads.
  • 11
    Cut one 7-3/4 inch length and one 8-1/4 inch length of Black chain.
  • 12
    Using one crimp bead, attach each end of beading wire from step #10 to an end link of each length of Black chain from step #11.
  • 13
    Slide one Silver disc spacer onto one head pin and form a wrapped loop to make a bead drop. Cut one single link of Black chain. Open the single link. Slide on the bead drop and one 6 mm split ring, then close the bead link. Connect the 6 mm split ring to the other end link of the 7-3/4 inch length of Black chain from step #12.
  • 14
    Open the other end link of the 8-1/4 inch length of Black chain from step #12 and connect one lobster claw clasp to complete the necklace.

Project Details

  • Level:beginner
  • Time:30 minutes

Project Supplies

  • Nicole's™ Bead Shop Wood/Glass Beads Black and White Zebra Stripe 44 pc. 104800981
  • Cousin Jewelry Basics Head/Eye Pins Black 135 pc. 104563099
  • Cousin Jewelry Basics Lobster Clasp 7 and 9 mm Black 24 pc. 104563280
  • Cousin Jewelry Basics Diamond Link Chain Black 70 inch 104524976
  • Cousin Jewelry Basics Split Ring 6 and 8 mm Black 300 pc. 104563601
  • Black Beading Wire
  • Cousin Jewelry Basics Crimp Tubes 2 mm Black 500 pc. 104563457
  • Cousin Tool Basics Value Pack 3 pc. 104257385
  • Nicole™ Crafts BeadSMART™ Crimping Pliers 104257317
  • Panacea Heavy Duty 8 inch Wire Cutters 104455865
  • Ruler or Tape Measure