Nicole's™ Bead Shop Atlantis Necklace

Back to category
by Nicole's™ Bead Shop Design Team

Nicole's™ Bead Shop Atlantis Necklace

Brilliant blues provide the foundation for beautiful jewelry!

Project Details

  • Level:beginner
  • Time:45 minutes

Project Instructions

  • 1
    Cut one 2 inch length of chain and two 4 inch lengths of chain. Take apart the metal link strands.
  • 2
    Attach the loop of one eye pin to the end of one diamond shaped metal link. Slide on one Gold bead, one large Blue bead, and one Gold bead. Wrap the excess eye pin around the other end of the diamond shaped metal link. Repeat this step for the other side of the necklace.
  • 3
    Attach the loop of one eye pin to the end of one large oval shaped metal link. Slide on one Gold bead, one small Blue bicone bead, one Milky White bead, one small Blue bicone, and one Gold bead. Wrap the excess eye pin around the other end of the large oval shaped metal link. Repeat this step for the other side of the necklace.
  • 4
    Using 6 mm jump rings, attach one circle metal link to one end of one diamond and one oval metal link from steps 2 & 3. Repeat this step for opposite side of the necklace.
  • 5
    Connect two small links together. Repeat for two sets of two links each. Using one 6 mm jump ring, attach one set of small links to the end of one diamond link from step 4. Using one 6 mm jump ring, connect the other set of small links to the end of one oval link from step 4. Repeat this step for the other side of the necklace.
  • 6
    Using one 4 mm jump ring, attach one 2 inch length of chain to the bottom small link connected to one large oval link from step 5. Using one 4 mm jump ring, attach one 4 inch length of chain to the top small link connected to one diamond link from step 5. Using one 4 mm jump ring, attach one lobster clasp to one of the 4 inch chains. Attach one 6 mm jump ring to the other 4 inch chain. Connect the lobster claw clasp to the 6mm jump ring to complete the back clasp of the necklace.
  • 7
    Slide one large Blue bead onto one eye pin and form a loop. Slide one Milky White bead and one Gold bead onto one ball pin and form a loop to create a drop. Using one 4 mm jump ring to connect the drop to the bottom eye pin loop on the large blue bead to create a pendant. Using one 4 mm jump ring, attach the top eye pin loop of the bBue pendant to the middle loop of the 2 inch length of chain.
  • 8
    Slide four small Blue bicones onto four head pins and form a loop, creating four drops. Slide two Milky White beads onto two head pins and form a loop, creating two drops. Slide four Gold beads onto four head pins and form a loop, creating four drops.
  • 9
    Divide the drops in half. Attach half the drops onto the chain on each side of the Blue pendant to complete the necklace.

Project Details

  • Level:beginner
  • Time:45 minutes

Project Supplies

  • Nicole's™ Bead Shop 6-1/2 inch Metal Link Gold Mix 104801439 (2)
  • Nicole's™ Bead Shop Acrylic Bead Strand Turquoise/Gold 72 pc. 104800633
  • Cousin Jewelry Basics Chain 64 inch Angled Small Figure Eight 104789775
  • Cousin Jewelry Basics Head Pins/Ball Pins/Eye Pins Antique Gold 135 pc. 104563096
  • Cousin Jewelry Basics 7 mm x 9 mm Lobster Claw Clasp Antique Gold 24 pc. 104563276
  • Cousin Jewelry Basics Jump Rings 4 mm and 6 mm Antique Gold 400 pc. 104563114
  • Cousin Tool Basics Value Pack 3 pc. 104257385
  • Flush Cutters
  • Ruler