Nicole's™ Bead Shop Nude Sparkle Jewelry Set

Back to category
by Nicole's™ Bead Shop Design Team

Nicole's™ Bead Shop Nude Sparkle Jewelry Set

Sparkle and shine with jewelry you made yourself!

Project Details

  • Level:beginner
  • Time:1-1/2 hours

Project Instructions

  • 1
    Earrings:
    1. Cut one 1-1/2 inch length of chain (10 links).
    2. Separate one oval link off the acrylic chain links. Place the length of chain from step around the oval acrylic link. Connect the ends of the chain together with one 6 mm jump ring.
    3. Using one 4 mm jump ring, connect one fish hook earring wire to the 6 mm jump ring from step 1.
    4. Insert 1 eye pin into one Nude bead and form a loop at the top to create a bead link.
    5. Insert one head pin into one Black Diamond/Copper mirror bead and form a loop to create a bead drop. Repeat this step.
    6. Slightly open the loop on one bead drop from step 5 and connect it to one of the loops on the Nude bead link from step 4.
    7. Using one 4 mm jump ring, attach the other bead drop and the loop of the other side of the Nude bead from step 6, to the middle link of chain on the inside of the oval acrylic link.
    8. Repeat steps 1 through 7 for the matching earring.
  • 2
    Necklace:
    1. Cut one 1-1/2 inch length of chain (10 links).
    2. Separate (1) oval link off the acrylic chain links. Place the length of chain from step #1 around the acrylic link. Connect the ends of the chain together with one 6 mm jump ring.
    3. Insert one eye pin into one Nude bead and form a loop at the top to create a bead link.
    4. Insert one head pin into one Black Diamond/Copper mirror bead and form a loop to create a bead drop. Repeat this step to make two bead drops.
    5. Slightly open the loop on one bead drop from step 4 and connect it to one of the loops on the Nude bead link from step 3.
    6. Using one 4 mm jump ring, attach the other bead drop from step 4 to the loop on the other side of the Nude bead from step 5. Connect that 4 mm jump ring to the middle link of chain on the inside of the oval acrylic link.
    7. Find the large Beige colored clay bead. Insert one eye pin and form a loop.
    8. Cut one piece of chain nine links long. Attach each end of chain to each loop on the clay bead using one 4 mm jump ring on each side.
    9. Using one 4 mm jump ring, attach the middle (fifth) link of chain from step 8 to the 6 mm jump ring on the top of the chain on the oval acrylic link from step 6 to create a hanging pendant.
    10. Cut one 24 inch length of beading wire.
    11. Slide one crimp bead and one 6 mm jump ring onto the wire. String the wire back through the crimp bead and crimp shut. Using one 4 mm jump ring, attach one lobster claw clasp to the 6 mm jump ring.
    12. String beads onto the wire in the following order: three Black Diamond/Copper mirror beads, one Bronze round glass bead, three Black Diamond/Copper mirror beads, one Nude glass bead, three Black Diamond/Copper mirror beads, one Bronze round glass bead, three Black Diamond/Copper mirror beads, one Nude bead, three Black Diamond/Copper mirror beads, one oblong Bronze clay bead, three Black Diamond/Copper mirror beads, one light Peach round glass bead and three Black Diamond/Copper mirror beads. Now slide the wire through the hole (over the eye pin) in the clay bead of the pendant from step 9. String on remaining beads in the reverse order of those on the other side of the pendant. Slide on one crimp bead and one 6 mm jump ring. String wire back through crimp bead and through two beads. Pull wire tight and crimp. Trim excess wire.
    13. Cut a 1-1/2 inch length of chain. Using one 4 mm jump ring, attach the chain to the 6 mm jump ring at the end of step 12 to complete the necklace.
  • 3
    Bracelet 1:
    1. Cut one 12 inch length of wire.
    2. Slide the wire through one crimp bead, through the loop on half of the round toggle clasp, and back through the crimp bead. Close the crimp bead. Trim off excess wire.
    3. String on two Black Diamond/Copper mirror beads then alternately string on: one Nude bead, one Black Diamond/Copper mirror bead, one Nude bead. Repeat this pattern until you have a total of seven Nude beads. Strong on (2) more Black Diamond/Copper mirror beads.
    4. Slide wire through one crimp bead, through the loop of the other half of a toggle clasp, and back through the crimp bead. Close the crimp bead. Trim off excess wire to complete the bracelet.
  • 4
    Bracelet 2:
    1. Cut one 12 inch length of wire.
    2. Slide the wire through one crimp bead, through the loop on half of the round toggle clasp, and back through the crimp bead. Close the crimp bead. Trim off excess wire.
    3. String on beads in the following order: one Gold faceted bead, one Bronze round glass bead, one Gold faceted bead, one Amber round glass bead, one Gold faceted bead, one large Amber acrylic bead, one Yellow/Purple mirror bead, one disc shaped Amber glass bead, one Yellow/Purple mirror bead, one large Amber acrylic bead, one Gold faceted bead, one round Amber glass bead, one Gold faceted bead, one Bronze round glass bead and one Gold faceted bead.
    4. Slide the wire through one crimp bead, through the loop of the other half of the heart clasp, then back through the crimp bead. Close the crimp and clip excess wire to complete the bracelet.

Project Details

  • Level:beginner
  • Time:1-1/2 hours

Project Supplies

  • Nicole's™ Bead Shop Nude Swirl Faceted Oval Beads with Spacer 17 pc. 104801031 (2)
  • Nicole's™ Bead Shop Glass/Acrylic Bead Strand Black/Copper Mirror Swirl 62 pc. 104800939
  • Nicole's™ Bead Shop Brown/Camel Link Bead Strand 11 pc. 104801295
  • Nicole's™ Bead Shop Glass/Clay/Resin Mixed Shape Beads Brown 15 pc. 104801287
  • Nicole's™ Bead Shop Glass Woven Bead Strand Gold/Amber 15 pc. 104801573
  • Cousin Jewelry Basics Starter Pack Copper 145 pc. 104563631
  • Panacea Heavy Duty 8 inch Wire Cutters 104455865
  • Cousin Tool Basics Value Pack 3 pc. 104257385
  • Crimping Pliers
  • Ruler