Nicole's™ Bead Shop Princess Diva Jewelry Set

Back to category
by Nicole's™ Bead Shop Design Team

Nicole's™ Bead Shop Princess Diva Jewelry Set

Create a stylish set!

Project Details

  • Level:intermediate
  • Time:1-1/2 hours

Project Instructions

  • 1
    Earrings:
  • 2
    Separate one length of six Light Peach acrylic chain links.
  • 3
    Cut one 6 inch length of Silver beading wire. Slide the middle of the wire through one end link of the chain from step #2. Slide a crimp bead over both ends of wire and close the crimp tight to the acrylic link. Slide both ends of wire through one flat Champagne mirror bead, slide one more crimp bead onto both ends of wire. Bring one end of wire through the bottom loop of one earring wire, back down through the crimp bead, and close the crimp bead.
  • 4
    Slide the earring wire through the bottom acrylic link to complete one earring.
  • 5
    Repeat steps #2 through 4 for the matching earring.
  • 6
    Bracelet:
  • 7
    Separate one length of two Light Peach acrylic chain links.
  • 8
    Cut one 6 inch length of beading wire. Slide one crimp bead onto one end of the wire, slide the wire through the loop on one side of a toggle clasp, then back through the crimp bead. Close the crimp bead. String on five flat Champagne mirror beads, one 16 mm Nude glass bead, and one crimp bead. Thread the beading wire through one acrylic link from step #7, back through the crimp bead, and close the crimp bead.
  • 9
    Cut one more 6 inch length of beading wire. Slide on one crimp bead, slide the wire through the loop on the other side of the toggle clasp, then back through the crimp bead. Close the crimp bead. String on five flat Champagne mirror beads, one 18 mm Nude glass bead, one 10 mm Nude glass bead, and one crimp bead. Thread the beading wire through the other acrylic link from step #8, back through the crimp bead, and close the crimp bead.
  • 10
    Trim off any excess wire to complete the bracelet.
  • 11
    Necklace:
  • 12
    Separate one 12 link length of Light Peach acrylic chain links. Set aside.
  • 13
    Cut one 12 inch length of beading wire. Slide one crimp bead onto one end of the wire, slide the wire through the loop of one side of a toggle clasp, then back through the crimp bead. Close the crimp bead. Thread on: eight flat Champagne mirror beads, one 10 mm Nude glass bead, one flat Champagne mirror bead, one 10 mm Nude glass bead, one flat Champagne mirror bead, one 14 mm Nude glass bead, one flat Champagne mirror bead, one 14 mm Nude glass bead, one flat Champagne mirror bead, and one crimp bead. Thread the beading wire through one end of the light peach acrylic chain links from step #12, back through the crimp bead, and close the crimp bead.
  • 14
    Repeat step #13, this time connecting to the other end of the Light Peach acrylic chain links.
  • 15
    Slide two flat Champagne mirror beads onto one eye pin. Form a loop to make one bead link. Open a link on one end and connect it to the space between the last flat Champagne mirror bead and the closed crimp at the end of step #13.
  • 16
    Repeat step #15, this time connecting the open link to the space between the last flat Champagne mirror bead and the closed crimp at the end of step #14.
  • 17
    Slide one 16 mm Nude glass bead and one flat Champagne mirror bead onto one eye pin. Form a loop to make one bead link. Using one 4 mm jump ring, connect this bead link to the other end of the bead link added in step #15.
  • 18
    Slide one 18 mm Nude glass bead and one flat Champagne mirror bead onto one eye pin. Form a loop to make one bead link. Using one 4 mm jump ring, connect this bead link to the other end of the bead link added in step #16.
  • 19
    Separate one 3-link length of Light Peach acrylic chain links.
  • 20
    Cut one 12-link length of Silver chain from the Silver starter pack. Open the loop at the bottom of the bead link from step #17, slide on one end of the 12-link length of Silver chain, slide the other end of the Silver chain through one end link of Light Peach acrylic chain from step #19, slide that end of Silver chain onto the open bead link loop, and close the loop.
  • 21
    Repeat steps #19 through 20, this time connecting the Silver chain to the loop at the bottom of the bead link from step #18
  • 22
    Separate one length of six Light Peach acrylic chain links.
  • 23
    Cut one 6 inch length of Silver beading wire. Slide the middle of the wire through one end link of Light Peach acrylic chain from step #22. Slide a crimp bead over both ends of wire and close the crimp snug to the acrylic link. Slide both ends of beading wire through one 8 mm Nude glass bead. Now separate the two wires.
  • 24
    Slide one crimp bead onto each wire at the top of the 8 mm Nude bead in step #23. Thread one side of the bead wire through the end link of Light Peach acrylic chain from step #20, thread it back through the crimp bead and close the crimp. Thread the other bead wire through the end link of light peach acrylic chain from step #21, thread it back through the crimp bead and close the crimp bead.

Project Details

  • Level:intermediate
  • Time:1-1/2 hours

Project Supplies

  • Nicole's™ Bead Shop Glass Matte Button Beads Peach/Flat Champagne 20 pc. 104801581 (3)
  • Nicole's™ Bead Shop Glass Graduated Opaque Beads Tan/Nude 11 pc. 104800693 (2)
  • Nicole's™ Bead Shop Acrylic Chain Links Light Peach 16 pc. 104801603 (3)
  • Cousin Jewelry Basics Starter Pack Bright Silver 59 pc. 104563639
  • Silver Beading Wire
  • Cousin Tool Basics Value Pack 3 pc. 104257385
  • Panacea Heavy Duty 8 inch Wire Cutters 10445586
  • Nicole™ Crafts BeadSMART™ Crimping Pliers 104257317
  • Measuring Tape or Ruler