Nicole's™ Bead Shop Starry Night Jewelry Set

Back to category
by Nicole's™ Bead Shop Design Team

Nicole's™ Bead Shop Starry Night Jewelry Set

Create a stunning ensemble!

Project Details

  • Level:beginner
  • Time:2 hours

Project Instructions

  • 1
    Earrings:
    1. Separate one large Blue disc connector leaving one jump ring attached and set aside.
    2. Slide one eye pin through one Blue speckled bead, one Gold rondelle and one Blue bicone. Form a loop to create a beaded link.
    3. Connect the jump ring from the connector in step 1 to the bottom loop of the beaded link from step 2.
    4. Connect the loop at the top of the beaded link from step 2 to the earring wire to complete one earring.
    5. Repeat steps 1 through 4 for the matching earring.
  • 2
    Bracelet:
    1. Separate two large Blue disc connectors, leaving one jump ring attached to each side of each connector.
    2. Slide one Milky White glass onto one eye pin and form a loop. Connect this bead to the jump rings between two Blue disc connectors from step 1.
    3. Separate two five-link lengths of large chain using two pairs of chain nose pliers to open the 6th link of the chain. (This chain is very thick and cannot be cut using cutters.) Attach one length of chain to the jump rings on the outside edge of each Blue disc connector.
    4. Connect one 6 mm jump ring to the end of one side of chain. Attach one more 6 mm jump ring to this jump ring.
    5. Connect one 4 mm jump ring to the loop in one lobster claw clasp. Using one 6 mm jump ring, attach the 4 mm jump ring to the end loop of the other length of chain to complete the bracelet.
  • 3
    Necklace:
    1. Separate two 17-link sections of thick chain using two pair of chain nose pliers to open the 18th link of the chain. (This chain is very thick and cannot be cut using cutters.) Attach one 6 mm jump ring to the end of each length of thick chain.
    2. Cut one 3 inch length of connector chain and connect it to one 6 mm jump ring on one length of chain from step 1. Slide one Blue bicone onto one head pin and form a wrapped loop to create a beaded drop. Connect this drop to the end loop of the extender chain.
    3. Connect one 4 mm jump ring to one lobster claw clasp and to one 6 mm jump ring on the other length of thick chain.
    4. Separate two large Blue disc connectors. Connect one Blue disc connector to the 6 mm jump rings on the open ends of each section of thick chain from steps 2 and 3. Set aside.
    5. Cut one 7-1/2 inch length of beading wire, one 8-1/2 inch length of beading wire and one 10-1/2 inch length of beading wire.
    6. Slide one crimp bead onto the 7-1/2 inch length of wire and slide the wire through the top inside hole of one of the Blue connectors, slide the wire back through the crimp bead, and close the crimp bead. Attach the 8-1/2 inch length of wire to the middle hole, and the 10-1/2 inch length of wire to the bottom hole of the same connector and attach using crimp beads.
    7. Thread the following beads onto the 7-1/2 inch length of wire: one Blue bicone, one Gold rondelle, one Blue speckled bead, one Gold rondelle, one Blue bicone, one Milky White glass bead, one Blue bicone, one Gold rondelle, one Blue speckled bead, one Gold rondelle, one Blue bicone, one Milky White glass bead, one Blue bicone, one Gold rondelle, one Blue speckled bead, one Gold rondelle and one Blue bicone. Slide one crimp bead onto the wire, slide the wire through the top hole on the other disc connector, and close the crimp bead. Trim any excess wire.
    8. Thread the following beads onto the 8-1/2 inch length of wire: one Milky White glass bead, one Blue bicone, one Gold rondelle, one Blue speckled bead, one Gold rondelle, one Blue bicone, one Milky White glass bead, one Blue bicone, one Gold rondelle, one Blue speckled bead, one Gold rondelle, one Blue bicone, one Milky White glass bead, one Blue bicone, one Gold rondelle, one Blue speckled bead, one Gold rondelle, one Blue bicone, one Milky White glass bead, one Blue bicone, one Gold rondelle, one Blue speckled bead, one Gold rondelle, one Blue bicone and one Milky White glass bead. Slide one crimp bead onto the wire, slide the wire through the middle hole on the other disc connector, and close the crimp bead. Trim any excess wire.
    9. Thread the following beads onto the 10-1/2 inch length of wire: one Gold rondelle, one Blue bicone, one Milky White glass bead, one Blue bicone, one Gold rondelle, one Blue speckled bead, one Gold rondelle, one Blue bicone, one Milky White glass bead, one Blue bicone, one Gold rondelle, one Blue speckled bead, one Gold rondelle, one Blue bicone, one Milky White glass bead, one Blue bicone, one Gold rondelle, one Blue speckled bead, one Gold rondelle, one Blue bicone, one Milky White glass bead, one Blue bicone, one Gold rondelle, one Blue speckled bead, one Gold rondelle, one Blue bicone, one Milky White glass bead, one Blue bicone and one Gold rondelle. Slide one crimp bead onto the wire, slide the wire through the bottom hole on the other disc connector, and close the crimp bead. Trim any excess wire to complete the necklace.

Project Details

  • Level:beginner
  • Time:2 hours

Project Supplies

  • Nicole's™ Bead Shop Acrylic Round Crackle 4 Hole Connector Turquoise/Gold 4 pc. 104800753
  • Nicole's™ Bead Shop Glass/Acrylic Bead Strand Turquoise/Gold Splatter 72 pc. 104800633
  • Cousin Jewelry Basics Chain Large Oval 20 inch Gold 104556579
  • Cousin Jewelry Basics Starter Pack Gold 145 pc. 104563633
  • Panacea Heavy Duty 8 inch Wire Cutters 104455865
  • Cousin Tool Basics Value Pack 3 pc. 104257385 (2)
  • Gold Beading Wire
  • Crimping Pliers
  • Ruler