Plaid Martha Stewart Halloween Party TableBack to category
Plaid Martha Stewart Halloween Party Table
Personalize a Halloween gathering with custom treat containers and décor.
- Time:2 hours
1Project time does not include drying time for the paint. Download and print project template.
2Use a utility brush to basecoat the entire wood plaque in Wet Cement. Let dry completely.
3Use the large flat brush to liberally apply the fine crackle effect to front and sides of wood plaque. Let dry for 24 hrs.
4Mix Beetle Black with tintable glaze effect then liberally apply over crackled wood plaque. While wet, wipe away excess glaze with sea sponge, leaving contrasting color in cracks. Let dry completely.
5Place typewriter stencils on front of wood plaque in curve to spell Trick then secure in place with stencil tape. Pour small amount of Beetle Black on palette. Lightly load paint on foam pouncer then dab over openings in stencil. Apply second coat of paint if needed. Remove stencils then repeat steps to add remaining words and monogram serif flourish design. Let dry.
6Before painting on galvanized tin, you must first wash it with soap and water. When dry, wipe with white vinegar dampened cloth. Let it dry and wipe again with clean water. If you are unsure if the tin is galvanized, clean as instructed above to ensure proper paint performance.
7Apply stencil tape around metal tins to mask areas for stripes. Apply paint with flat brush between taped areas. Complete one color at a time, rinsing brush between colors. Remove tape while paint is wet. Let paint dry then repeat process to complete additional stripes.