FolkArt Marbling Monogram

Back to category
by FolkArt Design Team

FolkArt Marbling Monogram

"M" is for marbling! Personalize your space with a custom monogram letter featuring FolkArt Marbling paint.

Create your own, snap a picture, and share using #ACMooreInspired.

Project Details

  • Level:beginner
  • Time:1 hour

Project Instructions

  • 1
    Apply a base coat of Wicker White paint to wooden letter. Sand rough spots lightly to create smooth working surface.
  • 2
    Protect your work surface with a sheet of wax paper. Squeeze a small amount of paint onto the letter. Working quickly and while still wet, squeeze a small amount of second color onto letter. Lift the wood letter, then tilt the letter in various directions allowing the Marbling paint to swirl into desired patterns. Allow excess paint to flow off the edges covering the sides of the letter.
  • 3
    Set the letter horizontally level over disposable cups so that the paint can dry without making direct contact with the protected work surface. Marbling paint will dry within 24 hours and cure within 48 hours.
  • 4
    Once cured, spray with FolkArt sealant.

Project Details

  • Level:beginner
  • Time:1 hour

Project Supplies

  • • Wood Letter; FolkArt Marbling Paints: White; Red
  • • FolkArt Multi-Surface Acrylic Paint: Wicker White; FolkArt Clearcote Acrylic Spray Sealer
  • • Wax Paper; Paper Towels; 3/4" Flat Brush; Disposable Cups; Fine-Grit Sandpaper