CPE The New Image Group Tiger Print Pillow

Back to category
by Patti Gorman, The New Image Group

CPE The New Image Group Tiger Print Pillow

Animal prints are always stylish, meaning this pillow will look great in living rooms, bedrooms and other rooms in your home.

Project Details

  • Level:intermediate
  • Time:1-1/2 hours

Project Instructions

  • 1
    Note: a 1/4 inch seam is used for this project. When sewing, make sure felt is face to face or print to print
  • 2
    Place four printed felt sheets into a block pattern, two on top and two on bottom.
  • 3
    Place the top two sheets face to face and sew along one of the 9 inch sides using a 1/4 inch seam. Repeat for the bottom two sheets.
  • 4
    Unfold your sewn pieces and place the bottom set on top of the top set, face to face.
  • 5
    Sew along the 24 inch side and unfold. You now have a four block pattern sewn together.
  • 6
    Repeat steps 2-5 with the Black felt sheets.
  • 7
    Place Black block and printed block face to face. Sew three outside edges together.
  • 8
    Turn pillow printed side out using the open edge and insert pillow form.
  • 9
    Fold a seam of inside of the open edges and sew the opening closed by hand or machine.
  • 10
    Place your buttons in the center of each side of the pillow. Lining up button holes on both sides of the pillow, sew through the top button and down through the bottom button.
  • 11
    Pull thread tight, and make 6-8 paces through each hole of the button for a secure attachment
  • 12
    Knot off end to secure and clip thread.

Project Details

  • Level:intermediate
  • Time:1-1/2 hours

Project Supplies

  • CPE The New Image Group Felt Sheet 9 inch x 12 inch Black 104276464 (4)
  • Printed Felt Sheets of Your Choice (4)
  • Pillow Form 20 inch x 26 inch
  • La Petite 4 Hole Buttons Black 1 inch 104235688
  • Scissors
  • Sewing Machine
  • Coats & Clark Dual Duty XP All Purpose Thread 250 yard Black 104498366
  • Needle