Walnut Hollow Monogram PlateBack to category
Walnut Hollow Monogram Plate
The Walnut Hollow Monogram Plate will look great on your door, on your wall, anywhere you want! And with so many colors of paint available at A.C. Moore, you can tweak this to any room in your home or anyone on your gift list!
- Time:1 hour
1Project time does not include drying time for the paint.
2Use large flat brush to apply 2 coats of Hauser Medium Green to back and edges of Plate. After first coat is dry, sand the wood surface lightly. Apply second coat. Dry thoroughly.
3Paint Antique White in center of plate applying 2 coats. After first coat is dry, sand the wood surface lightly. Dry thoroughly.
4To create stripes, place 3/4 inch tape in place vertically on plate edges. Pull tape over center of plate so stripes line up on all edges. Use fingers to press tape tightly to surface. Use stencil brush to paint 2 thin coats of Antique White to create stripes. It is always best to use little paint on the stencil brush to keep the paint from seeping under the tape. After Antique White has been applied, wipe brush thoroughly, but do not clean in water.
5Tape script letter stencil in center of plate. Stencil letter, again being careful not to use too much paint Hauser Medium Green paint. Apply 2-3 coats as needed. Let dry.
6For a protective finish, spray with 2-3 coats of satin varnish.
7Attach sticker flowers as shown in photo or as desired.