Walnut Hollow Personalized Sign
Back to categoryWalnut Hollow Personalized Sign
The Walnut Hollow Personalized Sign will look great on your door, on your wall, anywhere you want! This is a great gift to make for someone too!
Project Details
- Level:beginner
- Time:1 hour
Project Instructions
-
1Project time does not include drying time for neither the paint nor the glue.
-
2Basecoat entire signboard using large flat brush with 2 coats of an acrylic paint of your choice (if replicating photo, you may want to use Grey Sky). Let dry and sand with a fine grit sandpaper lightly between coats. Dry thoroughly.
-
3Use medium round brush to paint edge of signboard with 2 coats of a second, contrasting acrylic paint (you may want to use a color like Yellow Ochre, if replicating photo). Let dry.
-
4Use pencil to lightly draw scroll lines following outer edge of signboard. Use liner brush to paint scroll lines Lamp (Ebony) Black to match large letter.
-
5Use spray adhesive to adhere letter to signboard.
-
6For a protective finish, spray with 2-3 coats of varnish on entire signboard.