Natalie Collar Necklace

Back to category
by Cousin® Design Team

Natalie Collar Necklace

This rhinestone and chain collar necklace is the perfect accessory to give your outfit some added glamour and sparkle.

Project Details

  • Level:intermediate
  • Time:2 hours

Project Instructions

  • 1
    Cut a 15” length of flat chain. Attach a 6mm jump ring to each end of the chain and connect each jump ring to a two-strand toggle clasp end.
  • 2
    Cut (2) 10” lengths of flat chain. Attach a 6mm jump ring to one end of each chain. Connect the jump rings to the two-strand toggle clasp ends. Attach a 6mm jump ring to the other end of each chain.
  • 3
    Connect the other end of the 10” chains to the center link of the 15” chain.
  • 4
    Cut (2) 7”, (2) 5” and (2) 3-1/4” lengths of rhinestone chain. Attach a rhinestone chain end to the ends of each chain. Attach a 4mm jump ring to each rhinestone chain end at the end of each chain.
  • 5
    Cut (2) 7” and (2) 4-1/2” and (2) 1-3/4” lengths of the curb chain. Attach a 6mm jump ring to each end of each chain.
  • 6
    Cut (2) 3 1/2” lengths of flat chain. Attach a 6mm jump ring to each end of each chain.
  • 7
    Connect a 7” rhinestone chain jump ring to the top loop of the 15”. Attach the other end of the rhinestone chain to the jump ring linking the 10” chain to the center of the 15” chain. Repeat for the second 7” rhinestone chain on the other side of the necklace.
  • 8
    Connect a 7 curb chain jump ring to the fourth set of links on a 10” flat chain. Attach the other end of the chain to the last set of links at the bottom of the 10” chain (where the 10” chain meets the center of the 15” chain). Repeat for the second 7” curb chain on the other side of the necklace.
  • 9
    Attach a 5” rhinestone chain to the 10” flat chain approximately 2-1/2” down the side of the 10” chain. Attach the end approximately 1/2” from the end of the flat chain. Repeat for the second 5” rhinestone chain on the other side of the necklace.
  • 10
    Attach a 4-1/2” length of curb chain to the 10” flat chain approximately 3-3/4” down the side of the 10” chain. Attach the end approximately 3/4” from the end of the flat chain. Repeat for the second 4-1/2” curb chain on the other side of the necklace.
  • 11
    Attach a 3-1/4” length of rhinestone chain to the 10” flat chain approximately 4-1/4” down the side of the 10” chain. Attach the end approximately 1” from the end of the flat chain. Repeat for the second 3-1/4” rhinestone chain on the other side of the necklace.
  • 12
    Attach a 3-1/2” flat chain to the 10” flat chain approximately 4-3/4” down the side of the 10” chain. Attach the end approximately 1-1/4” from the end of the flat chain. Repeat for the second 3-1/2” flat chain on the other side of the necklace.
  • 13
    Attach the 1-3/4” length of curb chain to the 3-1/2” flat chain from the previous step. Attach the chain approximately 1” down the 3-1/2” flat chain. Attach the approximately 1-1/4” from the end of the 10” flat chain. Repeat for the second 1-3/4” chain.
  • 14
    Use 6mm jump rings to link the 15” flat chain, 7” rhinestone chain and 7” curb chain together, approximately every 1”. Use 6mm jump rings to link the 7” curb chain, the 5” rhinestone chain and the 4-1/2” chain together, approximately every 1”. Repeat for the other side of the necklace.

Project Details

  • Level:intermediate
  • Time:2 hours

Project Supplies

  • Cousin® Basic Chain Medium Flat 22 inch Silver 104525138 (2)
  • Cousin® Chain Rhinestone 24 inch Crystal/Silver 104525181 (2)
  • Cousin® Basic Jump Ring Open/Closed 6mm Silver 300pc 104563252
  •   Cousin® Basic Toggle 2 Strand 8 Set Silver 104563660
  •   Cousin® Basic Jump Ring Open/Closed 4mm Silver 500pc 104563244
  •   Beadalon® Chain Nose Pliers Designer Ergo 104458306
  • Panacea™ Heavy Duty Wire Cutters 104455865