Nicole's Bead Shop Boho Chic Earrings, Bracelet and Necklace

Back to category
by Dawn Ducette

Nicole's Bead Shop Boho Chic Earrings, Bracelet and Necklace

Beautiful blues and greens will make this one of your favorite jewelry sets!

Project Details

  • Level:intermediate
  • Time:2 hours

Project Instructions

  • 1
    Necklace: Start by cutting the following copper chain lengths: (1) 12 inch Copper Chain Length; (7) 2-1/4 inch Copper Chain Lengths; (2) 1 inch Copper Chain lengths.
  • 2
    Make (4) connectors using Copper eye pins, thread a 10 mm clear faceted Iridescent button bead onto the eye pin, form a loop on the other end.
  • 3
    Make (3) connectors using Copper eye pins, thread a 12 mm round speckled Turquoise bead onto the eye pin, form a loop on the other end.
  • 4
    Using a 6 mm Copper jump ring, attach (1) of the 1 inch chain lengths to the Antiqued Copper metal and Turquoise flower accent. Connect the other end of the 1 inch chain length to a 10 mm clear faceted Iridescent button bead from step 2, then connect the other end of the 10 mm clear faceted Iridescent button bead to (1) 2-1/4 inch chain lengths. Connect the other end of the 2-1/4 inch chain length to (1) 12 mm round speckled Turquoise connector from Step 3. Repeat this using all of the round speckled Turquoise connectors and (4) of the 2-1/4 inch chain lengths. On the end of the fourth 2-1/4 inch chain length connect (1) 10 mm clear faceted Iridescent button bead, and then the other 1 inch chain length. Connect the other end of this chain piece to a Copper nontextured round circle using a 6 mm jump ring.
  • 5
    Connect the 12 inch length of copper chain to the Antiqued Copper Metal and Turquoise flower accent using a 6 mm jump ring. Then connect the other side of the chain to the copper non textured round circle as you did in step 4.
  • 6
    Connect (1) 2-1/4 inch copper chain length to the Antiqued Copper Metal and Turquoise flower accent using a 6 mm jump ring, then at the end of the chain length connect a flattened oval Iridescent connector you made from Step 2. Repeat this twice. On the last 2-1/4 inch chain length connect it to the copper non textured round circle using a 6 mm jump ring. You should now have 3 swags.
  • 7
    Make one section by threading a Copper ball head pin thru the hole at the top of the textured Copper circle and then a 10 mm clear faceted Iridescent button bead onto it, form a loop. On the bottom hole of the textured Copper circle thread a Copper ball eye pin thru then thread on a flattened Turquoise semi- oval bead, form a loop. Repeat this step.
  • 8
    Make another section by threading a Copper ball head pin thru the hole at the top of a non-textured Copper circle and then a 10 mm clear faceted Iridescent button bead onto it, form a loop. On the bottom hole of the non-textured Copper circle thread a Copper ball eye pin thru then thread on a 12 mm round speckled Turquoise bead, form a loop.
  • 9
    Make (3) Green speckled ceramic bead connectors by threading onto a Copper eye pin one metal Antiqued Copper disk bead, one Green speckled ceramic bead, and then another Metal Antiqued Copper disk bead. Form a loop.
  • 10
    Make (2) 12 mm round speckled Turquoise connectors by threading onto a Copper eye pin one Turquoise speckled bead. Form a loop.
  • 11
    Make (1) wooden bead connector by threading one wooden bead onto a Copper eye pin, form a loop.
  • 12
    Using a 6 mm jump ring, connect the Antiqued Copper Metal and Turquoise flower accent at the top loop to (1) section you made from Step 7. Connect the loop on the top of 10 mm clear faceted Iridescent button bead to (1) of the Green ceramic bead connectors made in Step 7. Then connect the other end to the wooden bead connector from Step 11.
  • 13
    Connect the other end of the wooden bead connector to the section you made in Step 8. Then connect the top of that section to a round Speckled Turquoise connector from Step 10. Use a 6 mm jump ring to connect an S hook to the end.
  • 14
    Starting at the other side, the non-textured Copper round circle that the chain lengths are connected to, thread a Copper ball head pin into the top hole on the Copper round circle and then thru a flattened Turquoise bead, form a loop.
  • 15
    Connect the loop from the flattened Turquoise bead to a 6 mm jump ring. Connect a Green oval speckled ceramic connector to this jump ring as well. On the other end of the Green speckled oval ceramic connector, connect the loops you formed to the section made in Step 7. Connect the top of this section to the last 12 mm round Turquoise speckled connector. Add a 6 mm jump ring onto the other end.
  • 16
    Bring the S hook from the other end and connect.
  • 17
    Earring (make 2): Cut four 1-1/2 lengths, two 2-1/4 length & two 3 inch lengths of Copper chain.
  • 18
    Using a Copper eye pin thread one 12 mm round Speckled Turquoise bead, and then one Metal Antiqued Copper disk beads onto eye pin.
  • 19
    Form a loop and connect it to a Copper fish hook earring post.
  • 20
    Bracelet: Cut four 3-1/4 lengths of Copper chain.
  • 21
    Using one Copper eye pin, thread on one 10 mm clear faceted Iridescent button bead, one round Turquoise speckled bead and then another 10 mm clear faceted Iridescent button bead.
  • 22
    Connect the eye pin and two of the lengths of chain with a 4 mm Copper jump ring. Do this on the other side of the eye pin also.
  • 23
    Connect the round part of the Copper toggle clasp to the two lengths of chain using a 4 mm jump ring.
  • 24
    Connect the toggle bar part of the clasp to the other side of the two lengths of chain using a 4 mm jump ring.

Project Details

  • Level:intermediate
  • Time:2 hours

Project Supplies

  • Nicole's Bead Shop Acrylic/Wood Beads Speckled Mix Teal 65 pc. 104800901
  • Nicole's Bead Shop Glass Matte Button Rainbow/Iridescent 20 pc. 104801583
  • Nicole's Bead Shop Acrylic/Wood Crackle Strand Turquoise 18 pc. 104800875
  • Cousin Jewelry Basics Round Copper Accent with Teal Flower 2 pc. 104744344
  • Cousin Jewelry Basics Oval Rose/Copper Chain 160 inch 104563359
  • Cousin Jewelry Basics Head/Eye Pin Copper 135 pc. 104563103
  • Cousin Jewelry Basics Rondelle Beads 6 mm Copper 45 pc. 104561241
  • Cousin Jewerly Basics Crimp Tube Beads 2 mm Copper 500 pc. 104563459
  • Cousin Jewelry Basics Starter Pack Copper 145 pc. 104563631
  • Cousin Closure Pack Copper 8 pc. 104563385
  • Copper Round Textured & Non Textured Circles 7-1/2 inch (1 package)
  • Cousin Tool Basics Value Pack 3 pc. 104257385
  • Panacea Heavy Duty 8 inch Wire Cutters 104455865