iLoveToCreate® Bullseye Technique Onesie

Back to category
by iLoveToCreate®

iLoveToCreate® Bullseye Technique Onesie

Reach your creative target in no time with the Tulip® Classic tie-dye kit! Color tanks, tees, totes, hats and more in a few simple steps – just add water, shake and apply! It's easy as pie, or should we say, easy as "dye"!

Project Details

  • Level:beginner
  • Time:2 hours

Project Instructions

  • 1
    For best results, please read all instructions before beginning project. Refer to photo for color and design placement. Prewash fabric without fabric softener. Do not dry.
  • 2
    Cover work surface with plastic table cover. Lay damp fabric flat on work surface.
  • 3
    Decide where you want the center of bulls eyes to be on the fabric. Pinch fabric and pull up in tube shape.
  • 4
    Place rubber band about 1" from the top, continue banding every 2-3" along length of fabric.
  • 5
    Repeat for as many bulls eyes as desired.
  • 6
    Prepare dye following package instructions.
  • 7
    Apply dye colors between banded sections and to rest of Onesie®.
  • 8
    Cover fabric with plastic table cover. Let set 6-8 hours. 
  • 9
    Rinse fabric in warm water until water runs clear. Remove rubber bands.
  • 10
    Fill washer to large load setting with hottest water suitable for fabric and a small amount of non-bleach laundry detergent. Wash and dry separately for the first few washes.

Project Details

  • Level:beginner
  • Time:2 hours

Project Supplies

  • Tulip® One-Step Dye Kit® Classic 104768706
  • 100% cotton white Onesie®
  • Tulip® Surface Cover 104514560