iLovetoCreate Super Big Bullseye Technique Bucket Hat

Back to category
by iLovetoCreate Design Team

iLovetoCreate Super Big Bullseye Technique Bucket Hat

Reach your creative target in no time with this project!

Project Details

  • Level:beginner
  • Time:1 hour

Project Instructions

  • 1
    Project time does not include neither the washing of the bucket hat nor the time for the colors to set.
  • 2
    Prewash bucket hat without fabric softener. Do not dry.
  • 3
    Cover work surface with surface cover. Lay damp bucket hat flat on work surface.
  • 4
    Decide where you want the center of bullseye to be on the bucket hat. Pinch bucket hat and pull up in tube shape.
  • 5
    Place rubber band about 1 inch from the top, continue banding every 2-3 inch along length of bucket hat.
  • 6
    Prepare dye following package instructions. (Choose several different colors.)
  • 7
    Apply dye colors between banded sections and to rest of bucket hat.
  • 8
    Cover bucket hat with plastic table cover. Let set 6-8 hours. 
  • 9
    Rinse bucket hat in warm water until water runs clear. Remove rubber bands.
  • 10
    Fill washer to large load setting with hottest water suitable for bucket hat and a small amount of non-bleach laundry detergent. Wash and dry separately for the first few washes.

Project Details

  • Level:beginner
  • Time:1 hour

Project Supplies

  • Tulip One-Step Tie-Dye Kit Rainbow Super Big 70 pc. 104768724
  • 100% Cotton Bucket Hat White
  • Plastic Table Cover
  • Laundry Detergent
  • Laundry Detergent Without Fabric Softener
  • Clothes Washer