Swarovski Embellished Scarf

Back to category
by Cousin Design Team

Swarovski Embellished Scarf

Bling out your outerwear! Shine through the seasons with a sparkly Swarovski crystal embellished scarf.

Create your own, snap a picture, and share using #ACMooreInspired.

Project Details

  • Level:beginner
  • Time:2 hours

Project Instructions

  • 1

    Embellished Scarf

    1. Attach 6mm jump rings to twenty six AB triangle pendants.

    2. Use 4mm jump rings to attach the 6mm jump rings, from the previous step, around the base of each tassel on both ends of the scarf.

    3. Place dots of glue in the middle of the designs on both ends of the scarf.

    4. Use the wax tip applicator or tweezers to place flat backs onto the glue dots, push down to adhere, and allow to dry.

  • 2

    Embellished Scarf With Chain

    1. Cut three 2 1/2" lengths of chain.

    2. Use the jump rings on the charms to attach a charm to the bottom, middle, and near the top of each length of chain to make charm chains.

    3. Cut five lengths of chain approximately 6 1/2" each so they will drape between every other tassel so the skipped tassel is not covered up by chain. (Placement of tassels can vary from scarf to scarf….check that chain lengths are long enough before cutting.)

    4. Use a black jump ring to attach an accent and one end of a 6 1/2" chain just above the first tassel on one side of the scarf.

    5. Skip a tassel. Use another black jump ring to attach the other end of the chain from the previous step, the top of a charm chain from step 2, and an end of another 6 1/2" chain just above the third tassel over on the same side of the scarf.

    6. Skip a tassel. Use another black jump ring to attach the other end of the 6 1/2" chain from the previous step, an accent, and an end of another 6 1/2" chain just above the fifth tassel over on the same side of the scarf.

    7. Skip a tassel. Use another black jump ring to attach the other end of the chain from the previous step, the top of a charm chain from step 2, and an end of another 6 1/2" chain just above the seventh tassel over on the same side of the scarf.

    8. Skip a tassel. Use another black jump ring to attach the other end of the 6 1/2" chain from the previous step, an accent, and an end of another 6 1/2" chain just above the ninth tassel over on the same side of the scarf.

    9. Skip a tassel. Use another black jump ring to attach the other end of the chain from the previous step, the top of a charm chain from step 2, and an end of another 6 1/2" chain just above the last tassel over on the same side of the scarf.

    10. Repeat steps 1-9 for the other side of the scarf.

    11. Place dots of glue in the middle of the designs on both ends of the scarf.

    12. Use the wax tip applicator or tweezers to place flat backs onto the glue dots, push down to adhere, and allow to dry.

Project Details

  • Level:beginner
  • Time:2 hours

Project Supplies

  • • Nicole's Boutique Scarf; Swarovski 8mm AB Triangle Pendants (5pk); Swarovski Xirius AB Flat Back Mix (1pk); Swarovski Crystal Glue Pen; 4/6/8mm Bright Silver Open Jump Rings (1pk)
  • • Nicole's Boutique Scarf; 3pc Silver/Purple Accents (3pk); 10pc Brown Cluster Charms (2pk); Black/Gold Small Oval Chain (2pk); Swarovski 4mm Golden Shadow Flat Backs (2pk); Swarovski Crystal Glue Pen; 6mm Black Jump Rings (12)
  • • Needle-Nose Pliers (2); Wire Cutters; Wax Stick Crystal Applicator or Tweezers