CPE The New Image Group Dog Coat

Back to category
by The New Image Group Design Team

CPE The New Image Group Dog Coat

Make your pet this coat for play!

Project Details

  • Level:intermediate
  • Time:1 hour

Project Instructions

  • 1
    Download and print project template. Cut out dog coat from Red felt.
  • 2
    Cut one 2 inch strip of Velcro.
  • 3
    Lay the dog coat flat on a surface. The side facing up will be the outside of the coat.
  • 4
    Position the hook piece of Velcro face up on the right side of the neckpiece.
  • 5
    Position the loop piece of Velcro face down on the under side of the left side of the neckpiece.
  • 6
    Sew both pieces of Velcro in place.
  • 7
    Take the ribbon and lay it across the middle of the dog coat with ribbon extending on both sides. The extra ribbon on the sides is the ribbon that will be wrapped under your dog’s belly. Usually 8 to 10 inch on each side works best, but if you are unsure, leave extra ribbon (you can always trim extra ribbon later). Cut the desired ribbon length from the spool.
  • 8
    Center the ribbon across the dog coat and glue in place.
  • 9
    Cut one 4 inch strip of Velcro.
  • 10
    Flip the coat over so that the under side is showing.
  • 11
    On the left side (back side of ribbon), position the hook piece of Velcro face up. Sew in place.
  • 12
    Flip the coat over so that the good side is showing.
  • 13
    On the left side (good side of ribbon), position the loop piece of Velcro face up. Sew in place.

Project Details

  • Level:intermediate
  • Time:1 hour

Project Supplies

  • CPE The New Image Group Felt Craft Pack 36 inch x 36 inch Red 104276488 (or color of your choice)
  • Morex Hounds Tooth Ribbon 7/8 inch x 4 yard Red/Black 104796722 (or Ribbon of your choice)
  • Velcro Sticky Back Tape 5 foot White 104236061
  • Nicole™ Crafts Dual Temperature Trigger Glue Gun 104180411
  • Surebonder All Purpose Stik Glue Sticks 4 inch 50 pc. 104737928
  • Sewing Needle and Thread
  • Scissors
Download Project Template