Duck Tape® Serving TrayBack to category
Duck Tape® Serving Tray
No need to worry about spills or clean up with a Duck Tape-covered wooden tray!
- Time:2 hours
1Measure inside of tray. Create single side fabric of Duck Tape and cut to measured size. Place in tray and press down firmly.
2With Red tape cut strips the length of the long sides of the tray. Place long edge of tape on inside corner flush against the edge of tray. Pull and fold over top edge of tray to outside of tray.
3For sides of tray with handles, cut ½ inch strips of Red tape and cover around inside of handle.
4Measure the inside the handle side of the tray and cut Red tape. Place tape flush along the inside edge of the tray and cover over the handle opening. Carefully cut out opening with X-acto knife.
5For the outside, cover with length of tape (the width is perfect for the outside of the tray!). Start at top edge of tray and press down and trim on edges. You are again covering the handle opening. Trim out with X-acto knife.
6Because its water-resistant, its easy to clean!!!