Premier® Yarns Starbella® Strata Scarf

Back to category
by Premier® Yarns Design Team

Premier® Yarns Starbella® Strata Scarf

Incorporate trendy ruffles into your wardrobe with the Premier® Yarns Starbella® Strata Scarf or some other scarves on A.C . Moore's website!

Project Details

  • Level:beginner
  • Time:1 hour

Project Instructions

  • 1
    An exact gauge is not necessary for this project, so long as you work evenly and consistently throughout. The finished scarf measures approximately 82 inch long. If the needle listed under supplies does not work, switch to a different needle.
  • 2
    Cast on 2 stitches by inserting the needle from back to front through the top of the fabric at about 1/2 inch intervals, approximately 1/2 inch down from the edge of the fabric. Knit across row, working knit stitches as follows: Insert the needle in your right hand into the front leg of the first stitch on the needle from front to back and pierce the next area of the fabric, working from back to front with the right hand needle. Pull this new loop through the stitch and slip the stitch off the left hand needle. Knit every row until 6 inch of fabric remains.
  • 3
    Bind off, pulling remaining yarn through last stitch. Sew cast-on edge to bind-off edge with sewing needle and thread to form a circular scarf. Sew button on top of seam.

Project Details

  • Level:beginner
  • Time:1 hour

Project Supplies

  • Premier® Yarns Starbella® Strata Blush 104778163
  • Clover Takumi Bamboo Premium Knitting Needles Single Point 13 inch No. 5/3.75 mm 104236573
  • Sewing Needle and Thread
  • 1-1/2 inch Button