FloraCraft® Tombstone Place CardBack to category
FloraCraft® Tombstone Place Card
Make sure your guests know their final resting place - oops, we mean seating arrangements for the Halloween party - with this place card.
- Time:1/2 hour
1Use the Foam Cutter or serrated knife to cut six 6 inch x 3 inch pieces of foam from the foam sheet. Cut the two 2-1/2 inch balls in half. Cut three of the half balls in half again. Use the remaining half ball as a sanding block to sand and round the top corners of the 6 inch x 3 inch sheets.
2Paint the (6) ball quarters purple. While the paint is still wet sprinkle each with purple glitter and set them aside to dry.
3Completely cover each of the 6 inch x 3 inch tombstones with black duct tape. Be sure to gather the tape together slightly as you wrap to create lots of folds and wrinkles in the tape.
4Place a small amount of white acrylic paint on the plate. Add a little paint to the brush and then wipe off excess paint so that the brush looks almost dry. Lightly brush across the folds and wrinkles of the tape allowing some of the black tape to show through. Add more or less paint for your desired look. Let dry.
5Use the fabric paints applicator tip to write a message or guests name on each of the tombstones. Let dry flat.
6Glue the purple glittered ball quarters to the fronts of the tombstones to help them stand up.
7Glue on plastic spiders to embellish the tombstones.