Plaid FolkArt Happy Pumpkin Glass Block

Back to category
by Julie Lewis, Plaid

Plaid FolkArt Happy Pumpkin Glass Block

We love this adorable glowing pumpkin for Halloween!

Project Details

  • Level:beginner
  • Time:2 hours

Project Instructions

  • 1
    Thoroughly clean glass block before painting.
  • 2
    Tape off outer edge of glass block using 3/4 inch tape.
  • 3
    Place strips of 1/8 inch tape 7/8 of an inch apart starting at center.
  • 4
    Cut face pattern from stencil blank and place onto glass block over tape strips.
  • 5
    Using dauber, apply Pure Orange over front of block. Let dry slightly and apply second coat. Add third coat if desired. Carefully remove stencil and tape. Clean up any rough edges by gently scraping with craft knife.
  • 6
    When completely dry, place eye and teeth stencils onto block and apply Licorice.
  • 7
    Using liner brush, add nose and eyebrow details.
  • 8
    Let cure referring to bottle instructions.
  • 9
    Add a strand of lights.

Project Details

  • Level:beginner
  • Time:2 hours

Project Supplies

  • Plaid FolkArt Stencil Blank 104560742
  • Plaid FolkArt Enamels Paint 2 oz. Pure Orange 104108368
  • Plaid FolkArt Enamels Paint 2 oz. Licorice 104108390
  • Kraftyblok Glass Block 8 inch x 8 inch 104540362
  • Nicole™ Crafts 20 ct. Clear Light Strand White Wire 104283525
  • Princeton Artist Brush Co. Brush Select Synthetic Liner 1 104464145
  • Dauber Set
  • X-ACTO Precision Instruments No. 1 Knife 104135101
  • 3/4 inch Tape
  • 1/8 inch Tape
  • Ruler