Sweet Beads Boho Chic Beaded Hoop EarringsBack to category
Sweet Beads Boho Chic Beaded Hoop Earrings
Add some chic to your hoops with beads!
- Time:1/2 hour
1Each earring features seven dangles: two dangles with seven metal cube beads, two dangles with nine metal cube beads, two dangles with seven glass roundels and one dangle with nine facetted roundels. Make all fourteen dangles for both earrings firs by sliding the required beads onto a headpin. Cut the excess headpin so that 3/8 inch remains. Use round nose pliers to make a loop. Set aside each dangle until all are complete.
2Look at the backside of the hoop. Pull gently on the right side of the wire until it pulls away from the loop piece. Thread on each dangle in the order shown in the image of the finished piece. Separate each dangle using one facetted glass bead.
3Reinsert the wire back into the loop piece. Holding the wire firmly in place use your chain nose pliers to flatten the tube so that the wire is held firmly in place.
4Use a jump ring to attach the earwire to the loop.