The Kunin Group Felt Flower Power BannerBack to category
The Kunin Group Felt Flower Power Banner
Brighten up the inside or outside with this colorful flower banner.
- Time:2 hours
1Cut a 12 inch by 36 inch piece of the Saralma. Place wrong side up. Mark 9 inch widths across top edge. Across bottom edge measure in and mark 4-1/2 inch. Continue measuring 9 inch across bottom.
2Use ruler as guide to draw a diagonal line from the top outer corner to the 4-1/2 inch mark. Draw a second diagonal line from the first 9 inch mark to the 4-1/2 inch mark making a triangle pennant piece. Repeat across the remainder of the felt piece. This will give you double pennant pieces. Cut along lines making eight pennants. Set extra pennant pieces aside for another project.
3Cut a 6 inch square from each of the solid felt pieces. On each one, measure 3 inch center point along one edge. Draw diagonal lines to the 3 inch center point to create a triangle. Cut along lines.
4Cut three large and four small floral medallions from remaining piece of Saralma.
5Glue a solid felt triangle to the top of each Saralma triangle. Glue a large medallion in the center of three of the pennants. Glue two smaller medallions on the two remaining pennants. Glue a button to the center of each medallion.
6For each flower cut a 2 inch by 12 inch piece of felt. Fold felt strip in half; begin cutting evenly spaced slits from the folded center to the edges leaving 1/4 inch uncut. Keep strips folded and begin rolling, glue as you go. Glue to the end of the two triangles.
7Lay out pennant pieces right sides down. Glue ribbon along top edges leaving 12 inch at either end.