The Kunin Group Felt Snowflake Stocking

Back to category
by Debi Schmitz, The Kunin Group

The Kunin Group Felt Snowflake Stocking

Get your stocking ready for Santa!

Project Details

  • Level:intermediate
  • Time:2 hours

Project Instructions

  • 1
    Enlarge project template to 200 percent, then download and print. Cut all shapes in sizes, colors and quantities indicated.
  • 2
    Pin the 2 stocking pieces together with right sides together and stitch all around with a 1/4 inch seam allowance, leaving the top opened.
  • 3
    Flip inside out and iron the seams to form the stocking into shape. (Use a polyester setting on the iron and do not overwork or allow the iron to set. Tip: use a practice piece of felt before actually ironing on the project.)
  • 4
    Using the glue sparingly, attach the White toe piece, the White heel piece and a 2 inch x 14 inch White strip of felt around the top edge of the stocking, starting and stopping in the back.
  • 5
    Glue the tree onto the front of the stocking, slightly tilted.
  • 6
    Glue the ball fringe in place along the lower edge of the White felt strip at the top of the stocking.
  • 7
    Carefully glue the gems onto the Christmas tree like ornaments. If desired, glue additional rhinestones into the center of any snowflakes on the tree.
  • 8
    Cut a 1 inch x 6 inch strip of Solid Red felt for the hanging loop. Glue the ends inside the top of the stocking near the back seam on both the inside front and back.

Project Details

  • Level:intermediate
  • Time:2 hours

Project Supplies

  • 1/3 Yard of Decorated Red Felt (if Decorated Felt is unavailable use 1/3 Yard of Solid Red Felt)
  • 9 inch x 12 inch Felt Sheet Red
  • 9 inch x 12 inch Felt Sheet White
  • Nicole™ Crafts Rhinestones Jewelry Connection™ 120 pc. Round Crystal 7 mm 104240528
  • 1/2 Yard White Ball Fringe
  • Beacon FABRIC-TAC Permanent Adhesive 8 oz. 104148492
  • Coats & Clark Dual Duty XP All Purpose Thread 250 yard Red 104498372
  • Sewing Machine
  • Pins
  • Needle
  • Scissors
  • Ruler or Measuring Tape
Download Project Template